Fiat 500 Key Fob Replacement
If your 500 keyfob ceases working, try a different one to determine if it will be detected by the car. If it does, then it could be a problem related to the battery, or water damage on the original fob.
First replace the battery. The "+" side should be facing down.
Dead Battery
The majority of the time, when a fob doesn't work, it's just because the battery is dead. It's not difficult to fix and the majority of fobs will give you a warning if the battery is low. You can find the correct procedure for most car fobs on YouTube or in the owner's manual. You can also replace it by taking it to a locksmith or dealer who has sold it to you.
Other times, a device can stop working and there may be a problem with the circuit board in the internal circuit. This isn't very common but it is possible to happen. If you dropped the fob onto something hard, it could damage the internal chip. It can also happen if you use an aftermarket key, and the fob doesn't function. In this scenario you'll be required to go to a dealer or a locksmith and have it reconfigured to work with your 500.
One 2012 FIAT FIAT 500 flip key remote – Looks like Ilco with lock, unlock and trunk buttons - new keyless entry replacement (will need to cut & program by locksmith).
Damaged Chip
Fiat 500 key fobs are wireless devices that transmit a signal to the car whenever you press the button. It has a microchip that holds details about the code required to connect with your car. If the chip is damaged, it will not transmit the correct code and the car won't start. Locksmiths can fix the damage. United Locksmith can complete this repair on both classic and newer models, so do not hesitate to contact us.
A locksmith can program a new key fob. It is cheaper to do this instead of going to the dealer and performs the same. Locksmiths will require specific details from you, such as the year your car was manufactured as well as the model's name.
Rub the chip with an old dollar bill if you're not certain what to do. The copper in the bill is abrasive enough to remove dirt and oxidation, but it will not cause any harm to the microchip. The chip might not be repairable if it is physically damaged. This could happen if you drop it or get it pushed over by your vehicle.
Water Damage
Water damage is likely to happen on your device, whether you dropped it in the pool by accident or left them in pockets while swimming, or splashed water on them during a rainy afternoon. Even if you only have some water on the key, this can cause serious issues with the electronics inside and stop it from working effectively.
replacement fiat 500 key can usually solve this problem by taking the fob off and cleaning it with a paper towel. Once the fob has dried you can then replace its battery and it should begin working properly.
You can also take your key fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. The professionals can use special equipment to ensure that the key fob is compatible with your car's computer.
If the key fob on your Fiat 500 stops working, you might feel angry and stressed. It is tempting to go to the dealer to have your key fob replaced however, this can be expensive and unaffordable. Locksmiths can replace your key fob without needing to visit a dealership. They are a better choice over a dealer as they can handle every aspect of your car's key fob replacement without the need for a dealership visit.
Pairing Issues
If you lose your key fob, or it stops working and nothing else seems to be problem this could be because of the chip has gone out of sync. It could be due to water damage or a dead battery. it may just need reprogramming.
Most of the time, this can be accomplished by following the directions in the owner's manual. If you're having issues or your manual isn't working then you should hire an auto locksmith do this task. This will ensure that the chip isn't damaged, and is the most economical option.
Another problem with some 500 owners is that the key fob won't secure the car. This could be a major issue if you're at an gas station to fill up. Some owners have complained that the locking system on their 500 has failed and they had to replace the entire intermediate steering shaft. This problem has actually been mentioned in a technical service bulletin (TSB) issued by Fiat.
If you're having problems with your Fiat vehicle, the services of a reliable locksmith can help. They can duplicate the key you have or create a brand new one that is able to lock and start the vehicle. They are able to do this without looking at your old key, and is usually less expensive than buying a key from a dealer.